Hardcoded-password accounts that users can’t change from the admin panel have surfaced in two older D-Link models. According to the CVE entries published on November 15, one of the flaws can be exploited remotely over the network, and proof-of-concept code for both issues is publicly available on GitHub.
Which models are affected
The first issue, CVE-2026-129444, affects firmware version 20131126 of the D-Link DSL-6740C. The problem is in the device’s FTP server: a hardcoded password in the /etc/templates/ftpd/ftpd_conf.php file lets anyone who reaches the server log in with the same account. The entry classifies the vulnerability as CWE-798 (hardcoded credentials) and CWE-259 (hardcoded password), and notes that the attack can be carried out over the network, without prior authentication and without any user interaction. Its CVSS 3.1 score is 10.0, and its CVSS 4.0 score is 9.3.
The second issue, CVE-2026-129445, affects firmware version FW1.20WWb03 of the D-Link DIR-850L. This time the hardcoded password is in the console login, stored in /usr/sbin/consolepwd. This flaw requires local access instead (CVSS 4.0 score 9.3, CVSS 3.1 score 8.2): anyone who can reach the device’s console can log in with administrator privileges without knowing the password.
Why a hardcoded password is serious
The worst thing about hardcoded-password accounts is that they don’t go away no matter what the user does. Even if you change your own password from the admin panel, the account embedded in the device firmware stays active with the same password. Because the issue in the DSL-6740C is on the FTP side, the result is more than just a login attempt: anyone who can reach FTP gains read and write access to the device’s file system. Configuration files, backups, and credentials stored on the device could all be exposed through this door.
Both CVEs were assigned by VulDB, and their NVD entries are marked as “Deferred,” meaning NVD has not yet published its own analysis or scoring. The CVEs are not listed in CISA’s Known Exploited Vulnerabilities (KEV) catalog, so there is currently no confirmed record of them being used in the wild. Still, public exploit code is enough for scanning bots.
What you should do
- If you use a DSL-6740C and don’t need the FTP server, disable it from the admin panel.
- Block internet access to both the management interface and FTP; if you have a port forwarding rule set up for modem management, remove it.
- If you can’t disable FTP, restrict access to only your trusted internal network.
- Neither CVE entry mentions a fixed firmware version. For these end-of-support models, the safest option is to replace the device.
- Putting the device into bridge mode and using a router with up-to-date software behind it would also significantly reduce the risk.
If one of these models is on your line, the first thing to do is check whether the FTP setting is enabled in the admin panel. If it is and you’re not using it, turning it off is a faster fix than waiting for a patch.

Share your experience
Bir sorunun, farklı bir çözümün veya eklemek istediğin bir notun var mı? Giriş yapmadan da yazabilirsin.